REALME 3 PRO

INSTALLATION GUIDE

REALME 3 PRO

  • Model : RMX1851
  • CPU : Snapdragon 710
  • GSM band : 850 / 900 / 1800 / 1900
  • HSDPA : 850 / 900 / 2100 - India
  • HSDPA : 850 / 900 / 1700(AWS) / 1900 / 2100 - EMEA
  • LTE band : 1(2100), 3(1800), 5(850), 8(900), 38(2600), 40(2300), 41(2500) - India
  • LTE band : 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 20(800), 28(700), 38(2600), 39(1900), 40(2300), 41(2500) - EMEA

Supported system version (Build number)

Preparation

There are a couple things have to prepare before starting installation process, please follow the guide step by step

  1. ADB and Fastboot
      • adb and fastboot is the tools to unlock bootloader and install custom recovery. Download here and extract it on PC.
  2. Team Win Recovery Project custom recovery (TWRP)
      • TWRP is the custom recovery that use for install Azenqos firmware and root. Download here
  3. Azenqos kernel
      • This is the custom kernel that required to make the phone able to run Azenqos applications. Download the kernel file that match for devices model and software version from the link in supported version number above or here then copy to the phone.

Unlock bootloader

Mostly new android phone bootloader is locked, follow the instruction below step by step to unlock it before start installations process

Follow the official instructions from Realme in the link below

https://c.realme.com/in/post-details/1134295513231785984

Install Azenqos firmware

  1. Download TWRP for Realme 3 pro from the link in preparation step
  2. Download vbmeta.img from here
  3. Power off the device then boot it to fastboot mode by hold volume down and connecting the device to PC
  4. Open Command prompt on PC
    • Make sure adb/fastboot is installed on the PC or follow Install adb/fastboot on PC instructions
  5. Type the following command to install TWRP
    • fastboot --disable-verity --disable-verification flash vbmeta <folder/to/vbmeta.img>
    • fastboot flash recovery <folder/to/twrp.img>
    • change <folder/to/xxx.img> to full file location on PC
  6. Use volume button to change the options in fastboot mode, select Recovery and press power button. The phone will boot to TWRP mode.
  7. When the phone boot to TWRP
    • Select keep read-only options
    • Copy Azenqos firmware file on PC to the phone
  8. On the devices, go to Install --> select Azenqos firmware file --> slide to install and wait until it say DONE
  9. Go to Wipe --> format data --> type yes wait until finished and select reboot system
  10. Finish the setup and the phone is ready to install Azenqos application

Install Azenqos application

  1. Go to www.azenqos.com/beta
  2. Download AzenqosMobile-releaseXXXXXX_vXXX.apk
  3. Install it on the phone
  4. Open Azenqos apps and activate the license
  5. Azenqos is ready to use