REALME 3 PRO
INSTALLATION GUIDE
REALME 3 PRO
Model : RMX1851
CPU : Snapdragon 710
GSM band : 850 / 900 / 1800 / 1900
HSDPA : 850 / 900 / 2100 - India
HSDPA : 850 / 900 / 1700(AWS) / 1900 / 2100 - EMEA
LTE band : 1(2100), 3(1800), 5(850), 8(900), 38(2600), 40(2300), 41(2500) - India
LTE band : 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 20(800), 28(700), 38(2600), 39(1900), 40(2300), 41(2500) - EMEA
Supported system version (Build number)
UE EUTRA capability
Preparation
There are a couple things have to prepare before starting installation process, please follow the guide step by step
ADB and Fastboot
adb and fastboot is the tools to unlock bootloader and install custom recovery. Download here and extract it on PC.
Team Win Recovery Project custom recovery (TWRP)
TWRP is the custom recovery that use for install Azenqos firmware and root. Download here
Azenqos kernel
This is the custom kernel that required to make the phone able to run Azenqos applications. Download the kernel file that match for devices model and software version from the link in supported version number above or here then copy to the phone.
Unlock bootloader
Mostly new android phone bootloader is locked, follow the instruction below step by step to unlock it before start installations process
Follow the official instructions from Realme in the link below
https://c.realme.com/in/post-details/1134295513231785984
Install Azenqos firmware
Download TWRP for Realme 3 pro from the link in preparation step
Download vbmeta.img from here
Power off the device then boot it to fastboot mode by hold volume down and connecting the device to PC
Open Command prompt on PC
Make sure adb/fastboot is installed on the PC or follow Install adb/fastboot on PC instructions
Type the following command to install TWRP
fastboot --disable-verity --disable-verification flash vbmeta <folder/to/vbmeta.img>
fastboot flash recovery <folder/to/twrp.img>
change <folder/to/xxx.img> to full file location on PC
Use volume button to change the options in fastboot mode, select Recovery and press power button. The phone will boot to TWRP mode.
When the phone boot to TWRP
Select keep read-only options
Copy Azenqos firmware file on PC to the phone
On the devices, go to Install --> select Azenqos firmware file --> slide to install and wait until it say DONE
Go to Wipe --> format data --> type yes wait until finished and select reboot system
Finish the setup and the phone is ready to install Azenqos application
Install Azenqos application
Go to www.azenqos.com/beta
Download AzenqosMobile-releaseXXXXXX_vXXX.apk
Install it on the phone
Open Azenqos apps and activate the license
Azenqos is ready to use