REDMI NOTE 10

INSTALLATION GUIDE

REDMI NOTE 10

  • Model : M2101K7AG

  • CPU : Snapdragon 678

  • GSM 850 / 900 / 1800 / 1900

  • HSDPA 850 / 900 / 2100

  • LTE band : 1, 2, 3, 4, 5, 7, 8, 20, 28, 38, 40, 41

Supported Model version

  • M2101K7AG

!! If your device system version is not supported please send "About phone" screenshot to support@azenqos.com


PREPARATIONS

There are a couple things have to prepare before starting installation process, please follow the guide step by step


REQUIRED FILES

  • ADB and Fastboot

adb and fastboot is the tools to install custom firmware. Download here and extract it on PC.

    • Azenqos kernel

This is the custom kernel that required to make the phone able to run Azenqos applications. Download the kernel file that match the devices MIUI version from the link in the table below then copy to the phone:

  • 12.0.4.0

https://drive.google.com/file/d/1GzMQNyZfId05R6UepgAT9eSuKg7sfvpI/view?usp=sharing


UNLOCK BOOTLOADER

Mostly new android phone bootloader is locked, follow the instruction below step by step to unlock it before start any installations process

WARING!! : All data and information on the phone will be erase

Follow this brilliant guide from Explaining Android youtube chanel below to unlock Redmi Note 10 bootloader

https://www.youtube.com/watch?v=bG-vBEk85Pg


INSTALL AZENQOS FIRMWARE

  1. Download Azenqos kernel for Redmi Note 10 from the link in preparation step.

  2. Power off the device then boot it to fastboot mode by hold power + volume down button .

  3. Open Command prompt on PC

    • Make sure adb/fastboot is installed on the PC or follow Install adb/fastboot on PC instructions

  4. Type the following command to install TWRP

    • fastboot flash <folder/to/azenqos_kernel_file_name_here.img>

      • change <folder/to/azenqos_kernel_file_name_here.img> to full Azenqos kernel file path

    • fastboot reboot

  5. The phone will reboot.


INSTALL MAGISK AND BUSYBOX

  1. Download Magisk apk from here <-------------------- click to download

  2. Install it on the phone

  3. Open Magisk app and if it ask to install "additional setup" just select "OK" and reboot the phone once

  4. Please update magisk to latest version if there are available

  5. Go to the jigsaw icon at bottom left on magisk then select search icon

  6. Type "Busybox" in search box and select install icon on "Busybox NDK" module and wait until installation done

  7. Reboot the phone

  8. Open Magisk and go to settings. Change superuser notification to "none"

INSTALL AZENQOS APPLICATION

  1. Go to www.azenqos.com/beta5g

  2. Download AzenqosMobile-releaseXXXXXX_vXXX.apk

  3. Install it on the phone

  4. Open Azenqos apps and grant the supersu permission then activate the license

  5. Azenqos is ready to use