XIAOMI 11T PRO
INSTALLATION GUIDE
XIAOMI 11T PRO
Model : 2107113SG, 2107113SI
CPU: Snapdragon 888
GSM: 850, 900, 1800, 1900
HSDPA: 850, 900, 1700, 1900, 2100
LTE: 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 18, 19, 20, 26, 28, 32, 38, 40, 41, 42, 66
NR: 1, 3, 5, 7, 8, 20, 28, 38, 40, 41, 66, 77, 78 SA/NSA
Supported Model version
2107113SG, 2107113SI
!! If your device system version is not supported please send "About phone" screenshot to support@azenqos.com
PREPARATIONS
There are a couple things have to prepare before starting installation process, please follow the guide step by step
REQUIRED FILES
ADB and Fastboot
adb and fastboot is the tools to install custom firmware. Download here and extract it on PC.
Azenqos kernel
This is the custom kernel that required to make the phone able to run Azenqos applications. Download the kernel file that match the devices MIUI version from the link in the table below then copy to the phone:
13.0.2.0 SKDIDXM
UNLOCK BOOTLOADER
Mostly new android phone bootloader is locked, follow the instruction below step by step to unlock it before start any installations process
WARING!! : All data and information on the phone will be erase
Follow this brilliant guide from Explaining Android youtube chanel below to unlock Redmi Note 10 bootloader
https://www.youtube.com/watch?v=bG-vBEk85Pg
INSTALL AZENQOS FIRMWARE
Download Azenqos kernel for Xiaomi 11T Pro from the link in preparation step.
Power off the device then boot it to fastboot mode by hold power + volume down button .
Open Command prompt on PC
Make sure adb/fastboot is installed on the PC or follow Install adb/fastboot on PC instructions
Type the following command to install TWRP
fastboot flash <folder/to/azenqos_kernel_file_name_here.img>
change <folder/to/azenqos_kernel_file_name_here.img> to full Azenqos kernel file path
fastboot reboot
The phone will reboot.
INSTALL MAGISK AND BUSYBOX
Download Magisk apk from here <-------------------- click to download
Install it on the phone
Open Magisk app and if it ask to install "additional setup" just select "OK" and reboot the phone once
Please update magisk to latest version if there are available
Download busybox magisk module from here
Download screenrecord_ex magisk module from here
Download systemizer magisk module from here
Tap on the modules icon at the bottom right.
Tap on Install from storage then select the busybox magisk module module file and wait until installation finished then go back to the modules screen.
Repeat the step 9 to install screenrecord_ex magisk module and systemizer magisk module
Reboot the phone
Open Magisk and go to settings. Change superuser notification to "none"
INSTALL AZENQOS APPLICATION
Go to www.azenqos.com/beta5g
Download AzenqosMobile-releaseXXXXXX_vXXX.apk
Install it on the phone
Open Azenqos apps and grant the supersu permission then activate the license
Azenqos is ready to use